Question:

im having a problem with cruise control i had to replace my battery and cruise didnt work until then after replacing battery it worked for about 400 miles then quit again can you tell me what the problem may be also when i put a tape in my deck it messes up my radio stations and my clock any suggestions would be

Response:

sounds like a bad fuse, or bad cable -Matt – Hide quoted text — Show quoted text – >im having a problem with cruise control i had to replace my battery and cruise >didnt work until then after replacing battery it worked for about 400 miles >then quit again can you tell me what the problem may be also when i put a tape >in my deck it messes up my radio stations and my clock any suggestions would be

Response:

Ulysses or Happy Father please!  Glad Dad and I both experience similar problems!  I have solved the problem aesthetically, by unblocking a "hack job lectrick tape" plug in the extra port on the vaccum tree in or around the right valve cover.  My needle stood still until I temporarily re-blocked the small forward-facing port. It idles perfectly.  The large amount of air input makes me cautious about driving the vehicle until solved completely. 91 4Liter v6 4D PW PL PS AC CC 4WD  Thank you forwardly,   Jeff

Response:

My positive cable completely fell apart.  I also replaced the starter motor (had 260,000 miles on it).  You get to the starter motor by crawling underneath.  It has two bolts (one is a stud) and are removed with a 13mm wrench.  One small wire unplugs and the other big wire has a nut (also 13mm) holding it on.  It’s easier to remove the wires first then unscrew the motor. If your undercarriage is muddy I suggest hosing it off real good before removing the starter motor otherwise you’ll get dirt in your eyes. Why did you replace the alternator?  Because the voltage meter was jumping?

– Hide quoted text — Show quoted text -> my truck is having electrical problems. > i think i have tracked it down to the positive terminal that runs from the > battry.  this terminal has three leads, 2 are 4 guage one runs to the > solinoid and the other to the starter, the 12 guage wire runs from the > solinoid down to the starter. > one of the wires looks burnt. > the problme is when starting the truck it cranks once then has trouble > starting and once it does the the electrical guage on the dash bounces > around for a minute then returns to the nornal charging range.  i have had > the battery checked and replaced the alternator. > Has anyone else had this problem? > Also how do i get to the starter? > Im about to replace the terminal but if that doesnt do it i would like any > suggestions?

Response:

my truck is having electrical problems. i think i have tracked it down to the positive terminal that runs from the battry.  this terminal has three leads, 2 are 4 guage one runs to the solinoid and the other to the starter, the 12 guage wire runs from the solinoid down to the starter. one of the wires looks burnt. the problme is when starting the truck it cranks once then has trouble starting and once it does the the electrical guage on the dash bounces around for a minute then returns to the nornal charging range.  i have had the battery checked and replaced the alternator. Has anyone else had this problem? Also how do i get to the starter? Im about to replace the terminal but if that doesnt do it i would like any suggestions?

Response: